Troubleshooting: Too much powder and not enough water
Check the water is set between 70% and 100%. If not, increase the water level on the black dial and […]
Troubleshooting: Water/Disinfectant Bottle is leaking
Make sure the cap is firmly and properly closed. Check if the red O-ring is in place and not damaged.
How To: Use the AIRFLOW® MAX with the new Training Tool
Angle: Avoid using the AIRFLOW® MAX handpiece at 90° Continuously adapt the angle while working Maximal range is between 15°
How To: Reprocess the AIRFLOW® MAX Handpiece
After every patient treatment, wipe and rinse the handpiece with cold tap water. Remove the handpiece from the cord. Prior
How To: Unclog the AIRFLOW® MAX Handpiece
Fill a glass with the cleaning solution (liquid acetic acid 20% + 2-3 drops of dishwashing detergent or soap). Soak
How To: Insert and Remove PERIOFLOW® Nozzle
Attach the PERIOFLOW® nozzle to the handpiece. Push it against a hard surface to fully insert the nozzle. Use the
How To: Insert and Remove PIEZON® PS Instrument
Use the CombiTorque® to attach the PIEZON® PS instrument to the handpiece. Screw it on tightly. Before a patient treatment,
How To: Use the AIRFLOW® PLUS Powder Aluminium Bottle
Shake the bottle. Remove the aluminium seal. Screw on the EasyFill system on the bottle. Fill the PLUS Powder Chamber
How To: Change the O-ring of the AIRFLOW® Cord
Remove the handpiece from the cord and unscrew the white cap. Replace all 3 O-rings of the AIRFLOW® cord (orange,
How To: Use the PIEZON® PI MAX Instrument Tool
How to check the wear of the PI MAX instrument? Insert the instrument tip into the opening of the tool
How does the PIEZON® PS NO PAIN Instrument work
The PIEZON® PS Instrument can be used in 95% of all cases. The original PIEZON® No-Pain technology consists of 3
How To: Set up AIRFLOW® Station Plus
Turn the station upside down and attach the wheels on top. Screw in the four long screws. Take the bottle
How To: Set up AIRFLOW® Station
Turn the station upside down and attach the wheels on top. Screw in the four long screws. Place your air
How To: Remove powder residue from handpieces
Fill a syringe with water. Remove all air bubbles from the syringe. Attach the EasyClean to the syringe. Connect the
How To: Pair your pedal
Remove one battery from the foot pedal. Place all handpieces into their holders. Turn the device off. Wait for 10
How To: Set temperature and sound
Turn the device on and place the handpieces into their holders. Press the numbers 0 and 10 at the same
Maintenance of AIRFLOW® One
Every Morning: Place your filled water bottle onto the device. Remove the handpiece. Set the water to 10 on the
Installation of AIRFLOW® One
Unbox your device. Place your device sideways to connect the air and water lines. First, connect the water connector to
Maintenance of AIRFLOW® Prophylaxis Master
Every Morning: Place your filled water bottle onto the device. Remove both handpieces. Set the water to 10 on both
Installation of AIRFLOW® Prophylaxis Master
Unbox your device. Place your device sideways to connect the air and water lines. First, connect the water connector to