1. Remove one battery from the foot pedal.
2. Place all handpieces into their holders.
3. Turn the device off.
4. Wait for 10 seconds, then turn the device on again.
5. Press the numbers 0 + 5, followed by 10 at the same time.
6. Place the battery back into the foot pedal.
7. The LED lights on the device will start blinking for about 15 seconds.
8. Once the numbers stop blinking, the pairing is complete.

Troubleshooting: Wireless Foot Pedal is not working.

• If the pedal remained pressed for more than 10 minutes, release the pedal and power cycle the device.
• If this doesn't fix the issue, switch the device off, disconnect and reconnect both PIEZON® and AIRFLOW® cords. Then try again.
• If the issue is unresolved, contact your Service Centre for further support.